Air Horn Compressor, Air Ride Suspension Compressor with 3/8-Inch Stainless Steel Braided Hose & 3/8-Inch NPT In-Line Check Valve & Fuses for Car Horns Pneumatic Suspension Systems

"SpecificationsMaterial: Iron, CopperPower Source: Corded ElectricShut Down: ManuallyFeatures: Portable, High-pressureApplicable Models: Automobile UniversalPower: 200-300WAir Volume: 50L/13.21gal/min Suitable Capacity of Gas Storage Cylinder: ≤18.93L/5galNoise: 72dbVoltage: 12 VMax.Amperage: 23AmpsMax.Working Pressure: 200PSIMax.Duty Cycle 100% @100PSIFlow Rate @0PSI(13.8 Volts): 1.75 CFMProduct Size: 30*10*16.5cm/11.8*3.9*6.5inPackage Included1*Air Compressor2*Sealing Raw Material Belts1*Fuse1*Gas Pipe1*Filter ValveOther Installation AccessoriesNotes1.This air compressor can be powered by the 12V car battery but not the car cigarette lighter plug.2.Please do not overfill air gun tanks or air cylinders (less than 0.26gal), as this can cause serious injury. Never attempt to set the output pressure/auto shut-off above 30Mpa(300 bar). Please do not disassemble the machine without professional guidance. Otherwise, it may lead to damage to the machine.3.If the machine can not start, you can check and reset, try to restart the power supply, or open the valve to relieve pressure.4.If the compressor is overheating, you can check the motor rotation direction, wind blades, or cooling water circulation. And continuous working can not exceed 1 hour.5.If the pressure can't increase or the inflation time is too long, you can adjust or change the hose/connector, or clean/ change the valve sheet. If the machine is smoking, you should turn it off and restart it after it cools down. If the compressor vibrates strangely, you can try to tighten the screws or change the ground.6.Please do not touch the compressor or accessories with your hands during or immediately after use, except for the ON/OFF switch.

• 【Fast Efficiency】The copper motor has high conductivity and stable performance, which can bring strong power to meet your daily needs. It only takes few minutes for this air compressor to achieve fast inflation, which can save you a lot of time and electricity. The noise during the operation of this air horn compressor does not exceed 72db, which can give you a relatively quiet environment.
• 【High Safety】This air compressor kit doesn't have an exposed copper core, which can effectively prevent power leakage. Meanwhile, the positive and negative terminals of the quick-draw plug never cross and the product is protected against overheating, which makes it safer to use. The size is 11.8*3.9*6.5inch and it only weighs 9.92lbs, so it's lightweight and compact. Meanwhile, the top handle makes it easy for you to carry.
• 【Thoughtful Design】The air ride compressor comes with a standard 3/8-inch stainless steel braided hose, a 3/8-inch NPT in-line check valve, fuses, and mounting hardware for your convenience. The filtering device on it can effectively filter oil, water. It can also efficiently prevent oil. The machine can also support 12V car power to achieve convenient and fast inflation at any time and anywhere.
• 【Powerful Function】The on board air compressor is an important piece of equipment for vehicle suspension maintenance and upgrading, which improves the suspension performance and safety of the vehicle while reducing suspension damage and repair costs. The heavy duty air compressor uses high-quality iron and copper, which makes it strong and durable.
• 【Wide Application】The on-board air compressor system is suitable for car horns, pneumatic suspension systems, pneumatic tools, car tires, motorbike tires and so on. The integrated fast 12V power input plug on the side of this air compressor makes it convenient to pull and plug, as well as not easy to fall off. It is equipped with four footpads at the bottomp.